Tilmaamaha Aluminium Discs
| Magaca Alaabta | Alloy | daahirnimo | Adag | Tilmaamid | |
| Dhumucda | Dhexroorka | ||||
| Aluminium saxannada | 1050, 1060, 3003, 3105, 6061, 5754 iwm. | 96.95-99.70% | O, H12, H14 | 0.5-4.5 | 90-1020 |
Halabuurka Kiimikada (%) ee saxannada aluminiumka
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | Mid kale | Min Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.5 |
| 1070 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | - | 0.05 | 0.03 | 0.03 | 99.7 |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.00-1.50 | 0.03 | - | - | 0.1 | - | - | - | 0.15 | 96.75 |
Guryaha makaanikada ee saxanadaha aluminiumka ah
| xanaaq | Dhumucda (mm) | Xoogga Jilicsan | Dheeraynta(%) | Heerka |
| O | 0.4-6.0 | 60-100 | ≥ 20 | GB/T3190-1996 |
| H12 | 0.5-6.0 | 70-120 | ≥ 4 | |
| H14 | 0.5-6.0 | 85-120 | ≥ 2 |
Habka wax-soo-saarka ee wareegyada aluminiumka
Aluminium Ingot/Master Alloys - Foornada dhalaalaysa - Foornada Haysta - DC Caster - Slab - Mill Rolling Hot - Cold Rolling Mill - Madhan ( feeray goobada) - Foornada Annealing (furnad) - Kormeerka ugu dambeeya - Xirmooyinka - Bixinta
Codsiyada wareegyada aluminiumka
● Tiyaatarka iyo qalabka iftiinka warshadaha
● Qalabka cuntada lagu kariyo ee xirfadda leh
● Hawo-siinta warshadaha
● Gawaarida giraangiraha
● Gawaarida xamuulka qaada iyo taangiyada
● Haamaha shidaalka
● Maraakiibta cadaadiska
● Doomaha Pontoon
● Weelasha Cryogenic
● Maacuunka aluminiumka sare
● Aluminium Tadka Pan
● Sanduuqa Qadada
● Aluminium casseroles
● Aluminium digsi shiilan
Sawir Faahfaahin
