Tilmaamaha
Gariiradaha aluminium-ka duuban ee qaboobaha JINDALAI ayaa si sax ah loo dhameeyay si ay ula mid noqdaan heerarka caalamiga ah.Waxay leeyihiin qaab wanaagsan, dulqaad sare, is-bedel iyo sagxadaha aan cillad lahayn.Waxaa loo adeegsadaa codsiyada injineernimada ganacsiga iyo guud sida baska baska, daboolka iyo marawaxada.Shirkaddu waxay la kulmeysaa baahida macaamiisheeda weligood koraya iyadoo la socota casriyeyn joogto ah iyo hagaajinta habka.
Alloys-ka caadiga ah
| Cabirka | |||
| Halbeegga | Range | Heerka | Dulqaad |
| Dhumucda (mm) | 0.1 - 4.0 | - | laga bilaabo 0.16 ilaa 0.29 +/- 0.01 |
| laga bilaabo 0.30 ilaa 0.71 +/- 0.05 | |||
| laga bilaabo 0.72 ilaa 1.40 +/- 0.08 | |||
| laga bilaabo 1.41 ilaa 2.00 +/- 0.11 | |||
| laga bilaabo 2.01 ilaa 4.00 +/- 0.12 | |||
| Ballaca (mm) | 50 - 1620 | 914, 1219, 1525 | Gariiradda dillaacsan: +2, -0 |
| Aqoonsiga (mm) | 508, 203 | - | - |
| Cufnaanta gariiradda (kg/mm) | 6 max | - | - |
| Gariiradaha xardhan ayaa sidoo kale laga heli karaa dhumucda 0.30 - 1.10 mm. | |||
| Guryaha makaanikada | |||||||
| Alloy (AA) | xanaaq | UTS (mpa) | %E (daqiiqo) (dhererka cabbirka 50mm) | ||||
| Min | Max | ||||||
| 0.50 - 0.80 mm | 0.80 - 1.30 mm | 1.30 - 2.6 0mm | 2.60 - 4.00 mm | ||||
| 1050 | O | 55 | 95 | 22 | 25 | 29 | 30 |
| 1050 | H14 | 95 | 125 | 4 | 5 | 6 | 6 |
| 1050 | H18 | 125 | - | 3 | 3 | 4 | 4 |
| 1070 | O | - | 95 | 27 | 27 | 29 | 34 |
| 1070 | H14 | 95 | 120 | 4 | 5 | 6 | 7 |
| 1070 | H18 | 120 | - | 3 | 3 | 4 | 4 |
| 1200,1100 | O | 70 | 110 | 20 | 25 | 29 | 30 |
| 1200,1100 | H14 | 105 | 140 | 3 | 4 | 5 | 5 |
| 1200,1100 | H16 | 125 | 150 | 2 | 3 | 4 | 4 |
| 1200,1100 | H18 | 140 | - | 2 | 2 | 3 | 3 |
| 3103, 3003 | O | 90 | 130 | 20 | 23 | 24 | 24 |
| 3103, 3003 | H14 | 130 | 180 | 3 | 4 | 5 | 5 |
| 3103, 3003 | H16 | 150 | 195 | 2 | 3 | 4 | 4 |
| 3103, 3003 | H18 | 170 | - | 2 | 2 | 3 | 3 |
| 3105 | O | 95 | 145 | 14 | 14 | 15 | 16 |
| 3105 | H14 | 150 | 200 | 4 | 4 | 5 | 5 |
| 3105 | H16 | 175 | 215 | 2 | 2 | 3 | 4 |
| 3105 | H18 | 195 | - | 1 | 1 | 1 | 2 |
| 8011 | O | 85 | 120 | 20 | 23 | 25 | 30 |
| 8011 | H14 | 125 | 160 | 3 | 4 | 5 | 5 |
| 8011 | H16 | 150 | 180 | 2 | 3 | 4 | 4 |
| 8011 | H18 | 175 | - | 2 | 2 | 3 | 3 |
| Halabuurka kiimikada | ||||||
| Alloy (%) | AA 1050 | AA 1200 | AA 3003 | AA 3103 | AA 3105 | AA 8011 |
| Fe | 0.40 | 1.00 | 0.70 | 0.70 | 0.70 | 0.60 - 1.00 |
| Si | 0.25 | (Fe + Si) | 0.60 | 0.50 | 0.6 | 0.50 - 0.90 |
| Mg | - | - | - | 0.30 | 0.20 - 0.80 | 0.05 |
| Mn | 0.05 | 0.05 | 1.0 - 1.50 | 0.9 - 1.50 | 0.30 - 0.80 | 0.20 |
| Cu | 0.05 | 0.05 | 0.05 - 0.20 | 0.10 | 0.30 | 0.10 |
| Zn | 0.05 | 0.10 | 0.10 | 0.20 | 0.25 | 0.20 |
| Ti | 0.03 | 0.05 | 0.1 (Ti + Zr) | 0.1 (Ti + Zr) | 0.10 | 0.08 |
| Cr | - | - | - | 0.10 | 0.10 | 0.05 |
| Midba (kale) | 0.03 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 |
| Wadarta (kuwa kale) | - | 0.125 | 0.15 | 0.15 | 0.15 | 0.15 |
| Al | 99.50 | 99 | Hadhaaga | Hadhaaga | Hadhaaga | Hadhaaga |
| Lambarka kelida ahi waxa uu tilmaamayaa waxa ugu badan | ||||||
Alloys xooggan
| Cabirka | ||
| Halbeegga | Range | Dulqaad |
| Dhumucda (mm) | 0.3 - 2.00 | laga bilaabo 0.30 ilaa 0.71 +/- 0.05 |
| 0.72 ilaa 1.4 +/- 0.08 | ||
| laga bilaabo 1.41 ilaa 2.00 +/- 0.11 | ||
| Ballaca (mm) | 50 - 1250 | Gariiradda dillaacsan: +2, -0 |
| Aqoonsiga (mm) | 203, 305, 406 dhumucda <0.71 | - |
| 406, 508 ee dhumucda> 0.71 | ||
| Cufnaanta (kg/mm) | 3.5 max | - |
| Guryaha makaanikada | ||||
| Alloy (AA) | xanaaq | UTS (mpa) | %E (daqiiqo) (dhererka cabbirka 50mm) | |
| Min | Max | |||
| 3004 | O | 150 | 200 | 10 |
| 3004 | H32 | 193 | 240 | 1 |
| 3004 | H34 | 220 | 260 | 1 |
| 3004 | H36 | 240 | 280 | 1 |
| 3004 | H38 | 260 | - | 1 |
| 5005 | O | 103 | 144 | 12 |
| 5005 | H32 | 117 | 158 | 3 |
| 5005 | H34 | 137 | 180 | 2 |
| 5005 | H36 | 158 | 200 | 1 |
| 5005 | H38 | 180 | - | 1 |
| 5052 | O | 170 | 210 | 14 |
| 5052 | H32 | 210 | 260 | 4 |
| 5052 | H34 | 230 | 280 | 3 |
| 5052 | H36 | 255 | 300 | 2 |
| 5052 | H38 | 268 | - | 2 |
| 5251 | O | 160 | 200 | 13 |
| 5251 | H32 | 190 | 230 | 3 |
| 5251 | H34 | 210 | 250 | 3 |
| 5251 | H36 | 230 | 270 | 3 |
| 5251 | H38 | 255 | - | 2 |
| Halabuurka kiimikada | ||||
| Alloy (%) | AA 3004 | AA 5005 | AA 5052 | AA 5251 |
| Fe | 0.70 | 0.70 | 0.40 | 0.50 |
| Si | 0.30 | 0.30 | 0.25 | 0.40 |
| Mg | 0.80 - 1.30 | 0.50 - 1.10 | 2.20 - 2.80 | 1.80 - 2.40 |
| Mn | 1.00 - 1.50 | 0.20 | 0.10 | 0.10 - 0.50 |
| Cu | 0.25 | 0.20 | 0.10 | 0.15 |
| Zn | 0.25 | 0.25 | 0.10 | 0.15 |
| Ti | - | - | - | 0.15 |
| Cr | - | 0.10 | 0.15 - 0.35 | 0.15 |
| Midba (kuwa kale) | 0.05 | 0.05 | 0.05 | 0.05 |
| Wadarta (Kuwa kale) | 0.15 | 0.15 | 0.15 | 0.15 |
| Al | Hadhaaga | Hadhaaga | Hadhaaga | Hadhaaga |
| Lambarka kelida ahi waxa uu tilmaamayaa waxa ugu badan | ||||
Baakad
Gariiradaha waxaa lagu soo guray meel isha ilaa cirka ah ama meel gidaarka ah, lagu duuduubay HDPE iyo sabuurad adag, waxaa lagu xiray birta birta ah waxaana lagu dhejiyay sagxadaha alwaax.Ilaalinta qoyaanka waxaa bixiya baakadaha jel silica.
Codsiyada
● Qolalka baska iyo maydadka
● Dahaarka
● Ku-xidhka dhismayaasha, saqafyada aluminiumka isku dhafan, saqafyada beenta ah iyo saqafka (gariiradaha cad ama midabka leh)
● Tuubbooyinka baska korontadu, dabacsanaan, xariijimaha beddelka, iwm
Sawirka Faahfaahin
